SAJAC is a smart jacket for caving that helps explorers to monitor environmental conditions and request help when needed using BLE and LoRa

Tiny footprint MCU development board, testing BLE communication with LCD interface and Dynamixel Motor, for reduced space projects.

In this guide you will learn how to program the PIC-BLE and AVR-BLE development boards to write "Hello World" to the LightBlue app

Get started developing with the PIC-BLE and AVR-BLE development boards.

Start exploring your new development board in less than 30 seconds!

Need a last minute costume for Halloween? Be a human VU meter this year!

Switch on your brain's creative potential with this hacked Dash button – a timer that keeps you in the hypnagogic state.

Convert your USB MIDI instruments to wireless using one of these Bluetooth MIDI adapters.

Get notifications by email when your door has been unlocked.

Have trouble leaving the bed? When the alarm goes off, follow the instructions on your phone to disarm the ringing Bean Alarm Mechanism.

This project uses LightBlue-Bean to read photosensor values and send them to a serial port. The software used is PlatformIO IDE.

Convert a 3D-printed bagpipe chanter into a BLE MIDI instrument.

Step on a foot switch to control music apps or turn pages - using BLE MIDI CC toggle messages.

RC car controlled using BLE.

Technology and kids does not necessarily mean tablets and video games. A Lightblue Bean wearable is a small tech addition to good old games.

This is tutorial on how to log Data on LightBlue Bean.

A simple and straightforward way to measure bump, braking and turning acceleration on a student-built solar powered race car.

A quick tutorial and a great testing tool to make sure your BLE device is properly connecting and sending values.

In this tutorial, we'll learn how to set up BLE GATT services to make a thermometer using Intel's Arduino 101

Do you want to use Node-Red with Light Blue Bean? Just follow these 3 easy steps or download the provided code to do it for you!

A thumbs up/down button for Slack that works over BLE.

I used the Tickle app to program the Bean. Now the Bean is turned on when I shake my iPad and turn off when I shake the Bean itself.

This little Bluetooth board is ideal for wearable tech and tiny robots. Get started with these projects!

Monitors the temperature of your lunch box and alerts if it has been too warm.