SAJAC is a smart jacket for caving that helps explorers to monitor environmental conditions and request help when needed using BLE and LoRa
Tiny footprint MCU development board, testing BLE communication with LCD interface and Dynamixel Motor, for reduced space projects.
Monitor the temperature of several vaccine carrier cold box at large vaccination sites using AWS IOT EduKit and Sub 1-Ghz sensor network.
A TinyML based wearable using Edge Impulse software to detect the tablet consumption action.
Use the power of machine learning to read your tapping pattern and keep your bike safe from potential thieves.
Multi-functional, solar powered streetlight designed to fashionably improve visibility as well as offer generic information via IoT
Build your own asset-tracking device that you can attach to everyday items that you commonly lose using the PIC-BLE development board.
In this guide you will learn how to program the PIC-BLE and AVR-BLE development boards to write "Hello World" to the LightBlue app
Low-cost IoT Gateway made with open-source software and hardware. Software includes temperature, humidity, and ambient light sensing.
Get started developing with the PIC-BLE and AVR-BLE development boards.
Start exploring your new development board in less than 30 seconds!
This project features a real time clock using 7-segment displays. The clock is initialized using Bluetooth and driven using UART.
Need a last minute costume for Halloween? Be a human VU meter this year!
Switch on your brain's creative potential with this hacked Dash button – a timer that keeps you in the hypnagogic state.
A temporary, programmable "tattoo" that can respond to its physical orientation, or play animations.
A smart shirt that sends infrared sensors and accelerometer data to a machine learning algorithm in order to determine good form exercises.
Let's hack a fidget spinner and turn it into a whirling dervish of sound making!
Convert your USB MIDI instruments to wireless using one of these Bluetooth MIDI adapters.
Get notifications by email when your door has been unlocked.
Have trouble leaving the bed? When the alarm goes off, follow the instructions on your phone to disarm the ringing Bean Alarm Mechanism.
This project aims to demonstrate the operation of the TB6612FNG drive together with Bean+ to control two DC motors through an iPhone app.
This project uses LightBlue-Bean to read photosensor values and send them to a serial port. The software used is PlatformIO IDE.
Convert a 3D-printed bagpipe chanter into a BLE MIDI instrument.